6" x 4.5" Rectangle Aluminum Puck

This aluminum puck is 6" x 4.5" and is used with a swing-away flat press to decorate the item 986 sublimation rectangle plate. The metal portion of the puck is 0.80" thick with a 0.125" thick silicon rubber sheet for a total thickness of 0.925". Pre-heat the puck in the press and then handle with gloves. When decorating the plate, use heat tape to hold the transfer in the center of the plate, cover with a blank piece of paper and then place the puck (silicon rubber side down) on the center of the plate. Press at 400 degrees for 8 to 15 minutes. The time depends on how powerful your heat press is, as the heat has to travel through the aluminum puck to the transfer and plate. If your image is too light, you likely need to press at a longer time, and if the image browns then you have pressed too long.